YOU ARE HERE » Home » District Standard Specifications
Provided herein are standard specifications and guidelines which the District has either developed or adopted. The guidelines contain criteria and standards which govern engineering and rights-of-way practices at the District. The figures show standard drawing details for commonly used equipment and materials at the District. The specifications provide more detailed information to staff, consultants and contractors who will be performing services on behalf of the District. Where not specifically referenced herein, Utah’s American Public Works Association (APWA) standard specifications and/or American Water Works Association (AWWA) standards apply.
The APWA standard specifications are found at the following location: utah.apwa.net
Division 00 - General Conditions
Section 00 70 00: General Conditions (For use by Contractors and Engineers on capital projects and/or services which are greater than $50,000
Division 1 - General Requirements
Section 01 31 13: Coordination
Section 01 35 10: Pipe Loading Restrictions
Section 01 78 29: Survey &GIS
Division 2 - Existing Conditions
Section 02 10 00: Storage, Contamination & Drainage
Section 02 10 05: Damage & Unanticipated Conditions
Division 3 - Concrete
Division 31 - Earthwork
Section 31 05 05: Earthwork (POMWTP)
Division 32 - Exterior Improvements
Section 32 30 00: Site Improvements
Section 32 31 10: Fences - General
Section 32 31 11: Gates - General
Section 32 31 13: Chain Link Fences and Gates
Section 32 31 15: Wood Fences and Gates
Section 32 31 16: Welded Wire Fences and Gates
Section 32 31 17: Fabricated Metal Fences and Gates
Section 32 31 18: Vinyl Fences and Gates
Section 32 91 20: Landscaping
Division 33 - Utilities
Section 33 02 00: Utility Crossings
Section 33 05 01: Acrylonitrile-Butadiene-Styrene ABS Pipe (APWA)
Section 33 05 02: Concrete Pipe and Culvert (APWA)
Section 33 05 05: Ductile Iron Pipe (APWA)
Section 33 05 06: Polyethylene Pipe (APWA)
Section 33 05 07: Polyvinyl Chloride Pipe (APWA)Pipe
Section 33 05 09: Steel Pipe - Lined and Coated(APWA)Pipe
Provided below are guidelines which have already been or which need to be developed by the District. These guidelines differ from specifications in that they are more general in nature and are meant to govern and guide both District staff and outside contractors, vendors, and consultants.
01 Instrumentation & Control
03 Word Processing
04 Computer Aided Design (CAD) Guidelines
Provided below are standard details developed by the District for use by contractors, vendors, and consultants.
Figure 1 Grab Bar Ladder Up
Figure 2 Vault Access Hatch
Figure 3 Single Leaf Fabricated Metal Gate
Figure 4 Double Leaf Fabricated Metal Gate
Figure 5 Fabricated Metal Gate
© Copyright 2009 Metropolitan Water District of Salt Lake & Sandy